UPSSSC JE Syllabus 2024 and Exam Pattern for Junior Engineer Posts


The Uttar Pradesh Subordinate Services Selection Commission (UPSSSC) has released the UPSSSC JE Syllabus 2024 PDF for Junior Engineer Posts on 18th September 2024. All those candidates who successfully registered for UPSSSC JE Exam 2024 must go through the syllabus and exam pattern to understand the topic-wise questions, number of sections, and marking scheme. Knowing the UPSSSC syllabus acts as a roadmap for your preparation. It helps you to track the topics you have already covered and those that are still remaining.

UPSSSC JE Syllabus and Exam Pattern 2024

This syllabus outlines topics for each subject, helping candidates understand which areas will be more important in the exam and require more preparation time. This UPSSSC Exam 2024 for the recruitment of 4612 vacancies of Junior Engineer posts will be conducted offline across various centers in Uttar Pradesh.

The written exam is conducted at the state level and consists of 300 multiple-choice questions. It is held offline in both Hindi and English languages. It’s important to note that there is a penalty of 0.25 marks deducted for every incorrect answer, so candidates should answer carefully.

UPSSSC JE Syllabus and Exam Pattern 2024 – Highlights
Organization Uttar Pradesh Subordinate Services Selection Commission (UPSSSC)
Exam Name UPSSSC JE 2024
Post Name Junior Engineer (JE)
Vacancies 4612
Level of Exam State Level
UPSSSC JE Exam Date 2024 To be notified
Exam Mode Offline
Exam Language Hindi and English
Number of Question 300
Negative Marking 0.25 Marks
Official Website www.upsssc.gov.in

UPSSSC JE Selection Process 2024

The selection process for UPSSSC JE Recruitment 2024 for Junior Engineer posts consists of two stages: a written exam followed by an interview. Only candidates who pass the written exam will proceed to the interview stage. It’s essential for candidates to successfully clear both stages of the selection process to be considered for the UPSSSC JE positions.

UPSSSC JE Exam Pattern 2024

Before candidates start preparing, it is important they understand the structure of the UPSSSC Junior Engineer exam, including its duration, scoring system, and question format. The exam primarily comprises objective-type questions. The exam is divided into 3 parts. The exam consists of 100 multiple-choice questions for a total of 100 marks. The time duration for the exam will be 02 hours (120 minutes). There is a negative marking 1/4 mark will be deducted for a wrong answer. 

Part Subject Number of Questions Total Marks
Part 1 (Subject related Knowledge)

Strength of Materials & Theory of Structures

05 05

Design of Reinforced Concrete Structures

10 10

Steel & Machinery Structures

05 05

Estimation, Costing &

Valuation

05 05

Soil Mechanics and

Foundation Engineering

05 05
Surveying 05 05

Transportation Engineering

05 05

Environment and Public Health Engineering

05 05

Building Materials and Construction

10 10
Irrigation Engineering 05 05
Fluid Mechanics 05 05
Part 2

Knowledge of concepts of Computer and Information Technology and contemporary technological development and innovation in this field

15 15
Part 3

General information related to the state of Uttar Pradesh

20 20

Total

100 100

UPSSSC JE Syllabus 2024

The UPSSSC JE Syllabus 2024 for the written exam is divided into two papers. Paper 1 covers general Hindi and English, general intelligence and reasoning, general knowledge, and computer knowledge/awareness. This paper assesses candidates on their proficiency in languages, reasoning abilities, general awareness, and basic computer knowledge relevant to the job. Paper 2 focuses specifically on the candidate’s chosen engineering discipline, evaluating their understanding and expertise in the technical aspects related to the junior engineer role. This section is crucial as it directly tests the practical knowledge and skills required for the job.

UPSSSC JE Syllabus 2024 (Part 1)

Candidates preparing for the UPSSSC JE written exam should understand that Paper 1 covers various subjects and topics. It’s important for them to thoroughly study the complete list of topics specified for Paper 1 of the exam. Strategic preparation focusing on each topic will significantly enhance their chances of achieving a good score in this section of the exam.

Strength of Materials & Theory of Structures

Effect of a force, tension and compression, free body diagram, virtual work, force distribution system. Principle of energy, force conservation of energy and momentum, rotation of rigid bodies about fixed axis, mass moment of inertia. Stresses and strains, types of stresses and strains, definition of tension, simple compression, shear, bending, torsion, volumetric and lateral strain, Poisson’s ratio, Hooke’s law. Bending moment and shear force, types of beam, simply supported, cantilever, fixed, overhanging and continuous beams. Analysis of trusses, slope and deflection of beams. Long columns, short columns & struts, slenderness ratio. Torsion in circular shaft, combined bending, torsion and axial thrust, strength of hollow and solid shaft.

Design of Reinforced Concrete Structures
Design based on working stress method, flexural strength, shear strength and bond strength of a singly reinforced RCC beam, T-beams. Simply supported and cantilever beams, determinate and indeterminate structures, design of lintels, design of a cantilever beam and slab, design of doubly reinforced concrete beam. Design of RCC slab, design of one way and two-way slab, stair cases. Design of reinforced brick beams, slab & lintels, design of T-beams. Design of columns and column footings, cantilever retaining walls, components of overhead water tank and multistoried framed structures. Introduction to design based on limit state method. Prestressed concrete.

Steel & Machinery Structures

Tension and compression members in steel. Design of steel beams. Design of simple column & bases. Design of simple trusses, purlins, plates and girder.

Estimation, Costing & Valuation

Estimating, costing and method of valuation, analysis of rates. Method and unit of measurement. Value and cost, scrap value, salvage value, depreciation value. Simpson’s rule, centerline method, mid-section formula for earthwork calculation. Construction management, account & entrepreneurship development.

Soil Mechanics and Foundation Engineering

Fundamental terms and their relationships. Classification and identification of soil. Phase relationship index property, laboratory determination. Capillary phenomenon permeability, factors affecting permeability. Compaction, methods of compaction, consolidation, difference compaction and consolidation, stresses in

soil, shear strength, coulomb’s equation, unconfirmed compression test. Earth pressure retaining structures- dams and retaining walls. Concept of slope establishments. Shallow and deep foundations, classifications of piles, piles and pile caps. Stablisation of soils by lime and cement. Sub-surface exploration & standard tests, effective stress, active and passive earth pressures, dams and retaining wall.

UPSSSC JE Syllabus 2024 (Part 2)

Paper 2 of the UPSSSC Junior Engineer exam will include 15 questions related to Knowledge of Concepts of Computer and Information Technology and Contemporary Technological Development and Innovation in this field. Candidates can find the detailed syllabus for UPSSSC Junior Engineer Paper 2 below.

  • History, Introduction, and Application of Computer, Information Technology, Internet and World Wide Web (WWW).

  •  Digital Financial Tools and Applications.

  • Future Skills and Cyber Security.

  • Technological Development and Innovation in the field of Computer and Information Technology (Artificial Intelligence, Big Data Processing, Deep Learning, Machine Learning, Internet of Things) and India’s achievements in this field etc.

  • General Knowledge related to:

    1 Hardware and Software.

    2 Input and Output.

    3 Internet Protocol/IP Address.

    4 IT gadgets and their application.

    5 Creation of e-mail ID and use/operation of e-mail.

    6 Operation of Printer, Tablet and Mobile.

    7 Important elements of Word Processing (MS-Word) and Excel Processing (MS-Excel).

    8 Operating System, Social Networking, e-Governance.

UPSSSC JE Syllabus 2024 (Part 3)

General Information related to The State of Uttar Pradesh) – In this part of the question paper, questions based on History, Culture, Art, Architecture, Festivals, Folk Dance, Literature, Regional Languages, Heritage, Social Customs and Tourism, Geographical Landscape and Environment, Natural Resources, Climate, Soil, Forest, Wildlife, Mines and Minerals, Economy, Agriculture, Industry, Business and Employment, Polity, Administration of Uttar Pradesh and Current Events and Achievements of Uttar Pradesh State in various fields etc. will be asked from the candidates.

UPSSSC JE Syllabus 2024 PDF – Click to Download



Source link

Leave a Comment

Your email address will not be published. Required fields are marked *